軟擺錘/硬擺錘廠家批發價格廣東百航儀器廠家按照國家對電梯測試要求的新標準，研發出多款電梯測試用的試驗設備，能按客戶要求定制，滿足電梯新標準測試的標準要求，質量保證售后有保障，要了解更多歡迎來電咨詢。

軟擺錘/硬擺錘廠家批發價格軟擺錘 電梯層門擺錘沖擊試驗機 玻璃擺錘沖擊 電梯**檢測設備

參照標準：

GB 7588-2003《電梯制造與安裝**規范》附錄J的要求

參數：

高度：330mm±15mm

直徑：約240mm±10mm

材質：皮革袋制成的沖擊袋；袋內真裝直徑為（3.5±1mm)鉛砂

重量：45kg±0.5kg

用途：用于電梯層門、玻璃門及轎壁沖擊試驗

 

軟擺錘/硬擺錘廠家批發價格鋼化玻璃、夾層玻璃和中空玻璃等各種**玻璃檢測設備：

軟擺錘

參照：GB 7588-2003《電梯制造與安裝**規范》附錄J的要求

高度：330mm±15mm

直徑：約240mm±10mm

材質：皮革袋制成的沖擊袋；袋內真裝直徑為（3.5±1mm)鉛砂

重量：45kg±0.5kg

用途：用于電梯層門、玻璃門及轎壁沖擊試驗 。

硬擺錘

按國標 GB 7588-2003《電梯制造與安裝**規范》附錄J的要求.

高度：330±15mm

規格：240±10mm

材質：符合GB/T700鋼材Q275制成的沖擊體；殼內填裝直徑3.5±0.25mm

重量：10±0.1kg

用途：用于電梯層門、玻璃門及轎壁沖擊試驗 。

 

軟擺錘/硬擺錘廠家批發價格Soft pendulum elevator landing door pendulum impact testing machine glass pendulum impact elevator safety testing equipment

Reference standard:

Requirements of appendix J of GB 7588-2003 safety code for manufacture and installation of elevators

Parameters:

Height: 330mm ± 15mm

Diameter: About 240mm ± 10mm

Material: impact bag made of leather bag; the inner diameter of the bag is (3.5 ± 1 mm) lead sand

Weight: 45kg ± 0.5kg

Purpose: used for impact test of elevator landing door, glass door and car wall



Tempered glass, laminated glass, insulating glass and other safety glass testing equipment:

Soft pendulum

Refer to appendix J of GB 7588-2003 safety code for manufacture and installation of elevators

Height: 330mm ± 15mm

Diameter: About 240mm ± 10mm

Material: impact bag made of leather bag; the inner diameter of the bag is (3.5 ± 1 mm) lead sand

Weight: 45kg ± 0.5kg

Purpose: used for impact test of elevator landing door, glass door and car wall.

Hard pendulum

According to the requirements of appendix J of GB 7588-2003 safety code for manufacture and installation of elevators

Height: 330 ± 15mm

Specification: 240 ± 10mm

Material: impact body made of Q275 steel conforming to GB / T700; filling diameter in shell is 3.5 ± 0.25mm

Weight: 10 ± 0.1kg

Purpose: used for impact test of elevator landing door, glass door and car wall.